Areas Of Application; Before Loading The Machine And Before Starting A Programme; Cleaning The Spray Tube - Miele professional A 502 Mode D'emploi

en - Areas of application
30
Before loading the machine and before starting a
programme
– Is the module correctly docked to the water supply in the injector
unit?
– Check that the mobile unit is correctly docked to the water path in
the chamber.
For validation purposes please make sure that you follow the
loading instructions given on the template.
 Make sure that all screw connectors are fitted with injector
nozzles, adapters, irrigation sleeves or blind stoppers to ensure
that all rinsing fittings in use are supplied with sufficient standard-
ised pressure.
Damaged fittings such as injector nozzles, adapters and irrigation
sleeves must not be used.
Rinsing positions not in use do not have to be fitted with blind
stoppers.

Cleaning the spray tube

The spray tube can become blocked by residual soiling, so it must be
checked every day and cleaned as necessary.
Remove the spray tube from the unit by pressing the handle

inwards  while at the same time pulling it upwards .
Rinse deposits and soiling out of the spray tube with running water,

using a brush if necessary.
Replace the spray tube.

 Do not use the unit without the spray tube in place!