Configuring The Interface; Activating The Interface On The Washer-Disinfector; Changing The Report Language - Miele professional XKM 3100 WCDS Mode D'emploi

en - Configuring the interface
Changing the re-
port language
40

Activating the interface on the washer-disinfector

The module XKM 3100 WCDS uses the configuration settings of the
RS232 interface of the washer-disinfector.
Open the menu for configuring the RS232 interface via

tings Interface RS232
/ /
Mode
Mode
In the menu, select the

choice with OK.
Change the Baud rate

The RS232 interface is now activated for the WiFi module. After ap-
prox. 30 seconds the module is ready for operation.
The RS232 interface only supports a limited number of languages.
Therefore the output language for cycle reports is set separately from
the language setting of the washer-disinfector and the Miele app
DataDiary.
Open the menu for configuring the RS232 interface via

tings / Interface / RS232
Select a language in the

with OK.
.
Terminal
Printer
Terminal
to 9600 (factory default setting).
.
Language 
Further set-
option and confirm your
Further set-
menu and confirm your choice