Replacing Filter Plates; A 814 Holder For The Tips Of Air Scalers And Piezo Scalers - Miele professional A 315 Mode D'emploi

Replacing
filter plates
 Filter plates must be replaced approx. every 2 weeks or after
20 reprocessing cycles have been completed.
Unscrew the holder completely.

Dismantle the holder and dispose of the filter plate .

Rinse out the lower part  thoroughly.

Insert a new filter plate.

 Damaged or used filter plates must not be inserted under any
circumstances.
Screw the upper and lower parts of the holder back together and fit

the holder back onto the injector manifold.
A 814 holder for the tips of air scalers and piezo scalers
A 814 holder
The A 814 holder enables the tips of air scalers and piezo scalers to
be reprocessed. To increase capacity, the holder can be combined
with the A 813 adapter. The holder and the adapter each come with
their own operating instructions.
en - Areas of application
A 814 holder with A 813 adapter
43