Buchi Rotavapor R-300 Manuel D'utilisation page 96

10 | Annexe
96/120
Woulff bottle. 3-neck, 800 mL, P+G.
For trapping particles and droplets and for pressure
equalization.
Manometer with needle valve. Incl. vacuum
gauge, not incl. holder
Appareillage en verre
Assemblages en verre
Glass assembly A. Diagonal condenser, 1500
2
cm
For standard distillations, used with recirculating chiller
or tap water.
Features: Cleaning hole on top. Content: 1 L receiving
flask, required tubings, ball joint clamp, stopcock, fee-
ding tubing.
Not inclusive: Evaporating flask, vapor duct, vacuum
gasket, holder.
Glass assembly A. Diagonal condenser, 1500
2
cm , P+G
For standard distillations, used with recirculating chiller
or tap water.
Features: Cleaning hole on top. Content: 1 L receiving
flask (P+G), required tubings, ball joint clamp, stop-
cock, feeding tubing.
Not inclusive: Evaporating flask, vapor duct, vacuum
gasket, holder.
Glass assembly BY. Vertical intensive condenser,
2
reflux, 1300cm
For particularly efficient condensation with double ja-
cket condenser as well as for reflux distillations with
distributor and shut-off valve. Used with recirculating
chiller or tap water.
Features: Double jacket condenser. Additional joint on
top of the condenser for flexible expansion (SJ29/32).
Connection for vapor temperature sensor. Content: 1 L
receiving flask, required tubings, ball joint clamp, stop-
cock, feeding tubing, distributor.
Not inclusive: Evaporating flask, vapor duct, vacuum
gasket, holder.
BÜCHI Labortechnik AG
Réf. article
025519
047391
Réf. article
048168
048169
048176
Manuel d'utilisation Rotavapor® R-300
Schéma
Schéma