Temperature Unit - Dimplex FPE 050E Instructions De Montage Et D'utilisation

English
Set with the + / – keys:
Digit = 1: Restricted backlighting.
Digit = 0: Constant backlighting.
Press the MANUAL key until the main display
appears.
10.7

Temperature unit

Temperature unit display in degrees Celsius or
degrees Fahrenheit.
Switch off the heating device.
Press and hold the MANUAL key and ON/OFF key
for three seconds. NIV2 is shown.
Press and hold the WINDOW key for three
seconds. The backlighting flashes.
Press the MANUAL key until °C appears.
Set with the + / – keys:
°C: Display in degrees Celsius.
°F: Display in degrees Fahrenheit.
Press the MANUAL key until the main display
appears.
EN-11
10.8 Temperature setting range
Limit the setting range for the comfort temperature.
Maximum temperature change +/- 2°C.
Switch off the heating device.
Press and hold the MANUAL key and ON/OFF key
for three seconds. NIV2 is shown.
Press and hold the WINDOW key for three
seconds. The backlighting flashes.
Press the MANUAL key until ENCA appears.
Set with the + / – keys:
Digit = 1: Setting range limited to +/- 2°C.
Digit = 0: Setting range not limited.
Press the MANUAL key. Main display appears.
1802/A
FPE 050E - FPE 200E
www.dimplex.de/en