Control Unit; Battery Change; Key Functions - Dimplex PLX 050E Instructions De Montage Et D'utilisation

PLX 050E - PLX 300E
7. Control description
7.1

Control unit

The heating device is equipped with a configurable
electronic control, consisting of a display and six touch
screen keys. The control unit is located on the top on
the right. All settings can be selected using the six keys
on the user interface.
The set functions and values are shown on the display.
7.2

Key functions

MAIN MENU
Setting date and time
Timer week program
Manual operation
Frost protection mode
BACK
Return to the previous program item
Keys
Used to navigate through the menu and to change the
setting values.
ENTER
Saving settings.
FORWARD
Special functions such as switching to the next
programme item in timer mode or activating the run-
back timer.
www.dimplex.de/en
7.3 Display
The display lights up when this key is activated. If no
changes are made for a prolonged period, the display
switches off. If no key is pressed, the display returns to
the main menu after 30 seconds.
When the ENTER key is pressed, the 4-digit device
PIN and a possible bluetooth connection are shown
(currently without function).
7.4

Battery change

NOTE NOTE
The control includes a real-time clock with calendar
function. The clock has a button cell battery (type
CR2032, 3V), which supplies the clock with power in
the event of a power failure.
The battery compartment is located on the rear side of
the control unit.
Unlock the battery compartment (A) and pull it out
(B).
The battery is located on the rear side (C).
Pull out the button cell and replace it (D). Observe
the correct polarity (+ pole as shown).
Carry out assembly in reverse order.
1811/D
English
EN-4