Trebs 70002 Mode D'emploi page 12

Poubelle avec détecteur
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Instructions
Step 1 Take the dustbin out of the box
The automatic opening and closing control system consists of computer chips, infrared detecting
device, mechanical transmitting device and an electric drive system. It is a high-tech product,
combining machine, light, and electricity technique. It is made up of the lid (containing all
mechanisms and computer chip) and pail. Its advantages are high performance, long service life and
low energy consumption.
Step 2 Insert the batteries
Take out the top cover from inside of the pail. Open the cover of the
battery case at the bottom of the cover and equip it with four "C" size
batteries. Line it according to the "positive and negative poles".
Step 3 Insert the trash bag
Insert the garbage bag through the liner ring. Wrap the bag over and around
the liner ring. Place it into the pail and gently push it down while adjusting.
Squeeze battery cap in and carefully lift up to open. To close, insert side
without clip first and push the battery cap down. Make sure it clicks to ensure
that it's securely fastened. Insert bag through the liner ring hoop first, then
fold bag edges over the ring.
**DO NOT put liner ring inside the bag.
Step 4 Assembling trash can
Hold the front side of the top cover and press down onto the top of pail. Place
the rear side of the top cover on the pail first, then, press the front side down.
Step 5 Turn on the power
Turn on the power switch located inside of the dustbin. The red indicator
light will light up. The indicator light will flash every three (3) seconds, to
show that the electrical system is working properly.
Step 6 Infrared motion sensor
When throwing objects into the dustbin, hold the object or hand STILL approximately 20
cm above the sensor. The lid will open automatically within 0.5 seconds, then will close
automatically in 6 seconds after your hand or objects depart. If an object or hand does
not depart the sensor area, the lid will stay.
Special Features
Manual open and close button. The open button allows the lid to stay open until
the close button is pushed. The close button closes the lid and resets it back to
have it automatically open and close.
**Having the lid stay open manually for a long period of time will consume
battery life.
12

Publicité

Table des Matières
loading

Table des Matières