Connecting To A Buzzer Drive - Star TSP1000 Série Mode D'emploi

4-2. Connecting to a Buzzer Drive

You can connect a buzzer drive to the printer using a modular plug. The following
describes how to make the actual connection. See "Modular plug" on page 149
for details about the type of modular plug that is required. Note that this printer
does not come with a modular plug or wire, so it is up to you to obtain one that
suits your needs.
CAUTION
Make sure that the printer is turned off and unplugged from the AC outlet
and that the computer is turned off before making connections.
Connect the buzzer drive cable to the connector on the rear panel of the printer.
CAUTION
Do not connect a telephone line into the buzzer drive connector. Failure
to observe this may result in damage to the printer.
Also, for safety, do not connect wiring to the buzzer drive connector if
there is a chance it may carry excess voltage.
– 10 –