Star TSP1000 Série Mode D'emploi page 19

(3) Non recoverable error
Error Description POWER lamp
RAM error Off
EERROM error Off
Flash ROM error Off
Thermistor error
Off
Power supply Off
error
Note:
1) If a non recoverable error occurs, turn the power OFF immediately.
2) When Power supply error occurs, there is a possibility that the power
supply unit has a trouble.
For other non recoverable errors, please consult the dealer for repairs.
(4) Paper detection error
Error Description POWER lamp
Paper out error On
Paper near end On
ERROR lamp
Recovery Conditions
Flashes at 1.0
This is not a recoverable error.
second intervals
Consult dealer for repairs.
Flashes at 0.75
This is not a recoverable error.
second intervals
Consult dealer for repairs.
Flashes at 0.5
This is not a recoverable error.
second intervals
Consult dealer for repairs.
Flashes at 1.5 This is not a recoverable error.
second intervals
Consult dealer for repairs.
Flashes at 2
This is not a recoverable error.
second intervals
Consult dealer for repairs.
ERROR lamp
Recovery Conditions
Flashes at 0.5
Automatically recovered by loading
second intervals
a new paper roll, then closing the
printer cover.
Flashes at 2
Indicators show that the paper end
second intervals
is approaching, but the printer
continues to print.
– 16 –