Releasing A Locked Cutter - Star TSP1000 Série Mode D'emploi

8-3. Releasing a Locked Cutter

If the auto cutter locks up or fails to cut the paper, follow the steps below.
WARNING
Since working on the cutter may be dangerous, be sure to turn off the printer first.
(1) Set the power switch to OFF to turn off the printer.
(2) Slide off the front cover to reveal the auto cutter.
(3) Remove any jammed paper.
CAUTION
Be careful not to damage the printer while removing any jammed paper.
Since the thermal print head is particularly sensitive, be sure not to touch
it.
Front cover
– 28 –