Star TSP1000 Série Mode D'emploi page 141

B-3. USB Interface Model
ON
OFF
No. 1 2 3 4 5 6 7 8
DIP-SW1
Switch
1-1 Command emulation
1-2 Command emulation
1-3 Should not be changed (Should be set to on)
1-4 Sensor adjustment
1-5 USB mode
1-6 Handshaking conditions
(conditions for BUSY)
1-7 Automatic status back function Model 1
1-8 Should not be changed (Should be set to on)
The factory settings of DIP switch are all on.
Switch 1-1
ON
OFF
OFF
Note:
1) A STAR USB Printer Driver Set is needed for using the USB interface on
Windows 98 or 98SE . You can download the STAR USB Printer Driver
Set from the following website.
2) Download the Mode 2 (vendor class) driver set from the following
website for use.
Printer Driver URL
Switch
2-1~2-4
The factory settings of DIP switch are all on.
DIP-SW1
Function
Model 2
Switch 1-2
ON
ON
OFF
http://www.star-m.jp/eng/dl/dl02.htm
DIP-SW 2
Function
Always ON
– 138 –
ON
OFF
No. 1 2 3 4
DIP-SW2
ON
See table below
Valid
Mode 1 (Printer class) Mode 2 (Vendor class)
Offine or receive
buffer fuu
(Shoud be set to on)
Invalid
Command emulation
Star Line Mode
Star page Mode
ESC/POS Mode
ON
Should be set to on
OFF
Invalid
Receive buffer full
Valid
OFF