Before First Use; Making Coffee - Domo DO472K Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

PARTS
1.
Top cover
2.
Water tank with water
level indications
3.
Body
4.
On/off button
5.
Filter holder
6.
Drip stop
7.
Carafe lid
8.
Glass carafe of 1,5l
9.
Handle
10. Keep warm plate

BEFORE FIRST USE

Check if all accessories are included and if the appliance is not damaged.
First let water run through the appliance, without adding coffee. To do so, fill the
waterreservoir up to the maximum level, switch on the coffee maker and let the
water run through completely for about one or two times. Afterwards, dispose of
the water and clean the filter, carafe and lid of the carafe thoroughly with warm
water.

MAKING COFFEE

1. Open the top cover of the coffee maker and fill the water tank by using the carafe.
The amount of water should not exceed the maximum indication.
2. Put a paper filter into the filter holder
3. Pour the preferenced amount of coffee into the paper filter.
4. Insert the glass carafe horizontally into the coffee maker. Put it on to the keep
warm plate, under the drip stop.
5. Plug the power cord into the outlet and push the on/off button. The red indicator
will light up and the coffee maker will start brewing.
You can remove the carafe from the coffee maker at any chosen time to
pour coffee. The appliance will stop dripping automatically during 30
seconds. The appliance will automatically shut off after 40 minutes.
1
2
8
3
4
29
DO472K
5
6
7
9
10

Publicité

Table des Matières
loading

Table des Matières