Before The First Use; Brewing Coffee - Domo DO432K Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

THE CORD
The appliance has got a short cord in order to prevent tripping or getting entangled.
Be extra careful when using an extension cord.
If you wish to use an extension cord, please consider the following instructions:
The power indicated on the extension cord should be at least as high as the
power indicated on the appliance.
Make sure that the extension cord is not draped over the table or counter top.
Kids could pull the cord or trip over it.
SETTING UP
Remove all packaging parts and stickers, except for the rating label with the type
number and technical specifications that sticks on the bottom of the appliance.

BEFORE THE FIRST USE

Run the coffee maker twice with water only, without coffee or a filter bag:
1. Open the cover of the water reservoir.
2. To fill the water reservoir, you can lift the reservoir out of the coffee maker by
using the handle and fill it at the tap. Of course you can also use the glass carafe
to fill the water reservoir up to the maximum level.
3. Fill the reservoir with cold water up to the maximum indication.
4. Place the carafe on the keep warm plate and press the on/off switch to turn on the
coffee maker.
5. Wait until the water has run through and the process has ended.
6. Switch off the coffee maker and pour out the water.

BREWING COFFEE

1. Open the cover of the water reservoir.
2. Take the water reservoir by the handle and lift it out of the appliance.
3. Fill the reservoir with the desired amount of water and place the reservoir back
into the coffee maker. Of course you can also use the carafe to fill the water
reservoir.
ATTENTION: Make sure you do not exceed the maximum level indication when
filling the water reservoir. Never use warm water.
33
DO432K

Publicité

Table des Matières
loading

Table des Matières