First Use - Domo MY COFFEE DO437K Mode D'emploi

www.domo-elektro.be
PARTS
1. Lid
2. Water tank
3. Portable cup
4. Platform for cup
5. Start button
6. Indicator light
7. Removable filter basket
8. Handle
9. Gap for placement
10. Removable permanent filter
11. Handle
12. Cup lid with closeable
drinking spout

FIRST USE

1. Clean the removable parts according to the instructions in
the section 'Cleaning and maintenance'.
2. Before brewing coffee for the first time, let the My Coffee
run with only water:
3. Pour fresh cold water in the water tank up to the maximum
indication.
4. Place the removable filter basket into the filter holder, so
that the handle is resting in the gap at the left side of the
filter holder. The small gap in the filter basket will now
nicely surround the triangle at the top of the filter holder.
5. Place the permanent filter into the basket, so that the
handle is resting in the gap at the right side of the basket.
Caution: If the filter basket and the filter are not placed
correctly, the appliance will not operate properly.
6. Close the lid.
7. Place the cup on the platform below the filter holder.
8. Plug in the My Coffee.
9. Press the start button and let the water run through. Pour the water out of the cup
after the process.
1
2
4
9
8
33
DO437K - DO440K
12
3
5
6
7
10
11