Compatibility With Midland Bt Line Units; Pairing The Midland Btx2 Pro S To Bluetooth Devices; Background Feature - Midland BTX2 PRO S Guide D'utilisation

button or "Backward" button (depending on wich button you used for pai-
ring) . On the other intercom just press the phone redial or voice dial button.
Maybe it will be necessary to press the redial button two times, depending on
the model of the not Midland intercom.
Attention: In order to use the "Talk2All-Universal Intercom" feature the pairing
on the other unit must be done as a phone. The other intercom (not Midland
brand) will be able to be paired to a phone only if two phones are supported.
You can pair also a Midland unit as Talk2All, that means the pairing must be done
as a phone (one unit use the Talk2All procedure and the other unit use the pairing
to "Phone" procedure).

Compatibility with Midland BT line units

The BTX2 PRO S is compatible with Midland BT devices.
When paired the max distance of the intercom is defined from the lower pos-
sible.
The BTX2 PRO S is compatible with the previous line of Midland BT only if you
update the firmware.

Pairing the Midland BTX2 PRO S to Bluetooth devices

The Midland BTX2 PRO S unit can be paired to other Bluetooth devices, like
Phone, GPS Navigator or PMR446 Radio with built-in or external Bluetooth
(dongle). The pairing procedure must be done using the "Volume +" or the
"Volume -" buttons.
Vol- Always in background
› Phone (HFP/A2DP Stereo)
› GPS (HFP/A2DP Stereo)
› Dongle (HFP/A2DP Stereo)
www.midlandeurope.com
VOL+ High priority
› Phone (HFP/A2DP Stereo)
› GPS (HFP/A2DP Stereo)
› Dongle (HFP/A2DP Stereo)
› Pairing to the "Volume +" button: for Phone with music A2DP stereo, GPS
Navigator with A2DP audio or external mono/Stereo A2DP dongle. All de-
vices paired to "Volume +" button has higher priority and will interrupt all
the other communication (like Intercom, FM Radio and Music).
› Pairing to the "Volume -" button: for Phone with music A2DP stereo, GPS
Navigator with A2DP audio or external mono/Stereo A2DP dongle. All de-
vices paired to "Volume -" button are always in active in background during
the Intercom communication.
When a device is paired to the "Vol +" or "Vol –" buttons the "Phone" mode
is activated.

Background feature

The audio connection on any device paired on "Vol-" button, even if it is stereo,
is always in background. In this way the Intercom communication will not be
interrupted, for example, by the GPS's street indication or other audio source.
You can decide if the audio from the "Vol -" connection is shared with other
people when the intercom is open (public) or if it must be private (private).
Attention: By default the audio is private
The audio from "Vol -" has always lower priority against the Intercom, that
means when the intercom is open the audio is lowered by default to 50%. You
can change this setting using the BTUpdater PC Software
Pairing with one or two phones
The cellular phone can be paired to the "Vol +" or to the "Vol –".
When a phone is paired to the "Vol +" or "Vol-" the "Phone" mode is activated.
An incoming call has always the higher priority, that means all other commu-
nications will be closed (Intercom, FM Radio, Music).
If another incoming call will arrive on the second phone, an alert sound will
notify it.
WARNING!
In order to have the best performance with your mobile phone, it is suggested
to keep it as close as possible to your BTX2 PRO S unit, on the left side of your
body and in the upper pocket of your jacket if it's possible.
27