Conference - Midland BTX2 PRO S Guide D'utilisation

request is coming.
In this way as soon as the first conversation is over, the person can easily con-
tact the caller by opening the intercom of the specific button number (indica-
ted by the voice announcement).
1

Conference

1
The "Conference" mode allows the simultaneous communication between 4
people or, if you pair a intercom device also on "Vol-" , up to 8 people (4
couple). You can decide to use the BTX2 PRO S in "one to one" communi-
cation up to 6 people ("classic" Intercom mode) or with 8 people (4 couples)
conference intercom (Conference mode).
How to use the conference mode
First of all you need to pair all the units in a "chain" mode, second the "Confe-
rence" feature must be active on all the units paired.
Pairing
To use the conference mode you need to pair all the units in a "chain" configu-
ration. The BWD button of the first unit must be paired to the FWD button
of the second unit. The BWD button of the second unit must be paired to the
FWD button of the third unit and so on, till the fourth!
1 2
www.midlandeurope.com
3
2
3
2
3 4
The first and the last unit must not be paired together (the chain must stay
open). The unit number 1 can talk to the last unit (number 4) only "through"
the unit number 2 and number 3. That means to have the conference with four
people, all the unit must have the intercom open.
Activate Conference mode
In any mode with no active audio, keep pressed the FWD and Central buttons
for 3 sec. The voice announcement "Conference" will tell you that it is active.
When the Conference mode is active the bluetooth devices paired on "Vol+"
button are disconnected, the paring on CTRL button and the Universal Inter-
com are not available. Now only the paring on FWD and BWD buttons are
available, together with the device paired on the "Vol -" button.
When in Conference mode, you can always move to "FM radio" mode to li-
sten your favorite radio station or to "Phone" mode to control the phone con-
nected on the "Vol-" button.
Disable Conference mode
In any mode with no active audio, keep pressed the FWD and Central buttons
for 3 sec. The voice announcement "Intercom" will tell you that you are back
to the "One to One" Intercom mode and the device connected to the "Vol
+" is available again, together with the Phone, the pairing on CTRL button and
the Universal Intercom.
Conference mode 4 people
When the conference mode is active, it is possible to open the conference
communication pressing both the FWD and BWD buttons. One click on the
button will open the intercom communication, one click on the same button
will close it. The two units that are in the middle of the chain (unit 2 and 3)
must keep the intercom open on both FWD and BWD buttons to allow the
full communication of the four units together.
"One Click Talk" function
When the conference mode is active, is possible to open the conference com-
munication to all the 4 users just in "one click". Press short the CTRL (mid-
dle) button and you will automatically open the conference to the four units
connected.
25