Moving Through The Menus/Menu Overview - DENTSPLY Multimat Easy Instructions D'utilisation

‹ Moving through the menus/Menu overview

The values discussed in "Firing parameters" are shown
in the main menu, which is always displayed when the
unit is operating or when new programs are being pro-
grammed. On power-up, additional menus may appear
before the main menu. From the main menu, use the
Menu key to invoke numerous submenus where additional
parameters can be configured. To return to the previous
menu, press the ESC key. The following menu overview
explains what keys can be used in their respective menus:
Language
[German, English]
Basic temperature
[°C/°F]
Standby temperature
[°C/°F]
Standby Vacuum
[on/off]
°C / °Fahrenheit
[°C/°F]
Acoustic signal
[on/off]
enter
Configuration
Running times
Calibration
Delete programs
Load fixed programs
Update
Data backup
Degudent KBO
V1.00 .. .booting.. .
Selftest
Main menu
menu
(last program)
enter
Hours muffle:XX:YY
Hours pump:XX:YY
Hours furnace:XX:YY
Controls 5
49
MultimatEasy