Features - DENTSPLY Multimat Easy Instructions D'utilisation

3 Technical description

‹ Features

• Comprehensive firing data display
• 100 freely programmable and storable programs;
numerous predefined sample programs available
• Programs may be modified during the cycle.
• Existing programs can be modified and saved as spe-
cial programs
• Copying an existing program to a different program
number
• Up to 99 minutes of vacuum time
• Set vacuum display
• Adjustable vacuum
• Up to 99 minutes of firing time
• Up to 25 minutes of firing and pre-heating time
• Heating rates of 1–120°C/minute
• Cooling available in three cooling levels
• Manual or programmable fast cooling via vacuum pump
• Time-to-completion countdown display
• Overheating protection and muffle monitoring
• High-precision temperature settings
44
MultimatEasy
• Standby operation to avoid moisture in the firing chamber
• Vacuum program to avoid moisture in the fibre insulation
• Global hours-of-operation counter
• Vacuum pump hours-of-operation indicator
• Language selection
• Error message display
• Automatic continuation after short-term power-outs
• Unlimited data retention after power-outs
• Automatic mains frequency detection
• Beep signals, can be deactivated
• Entering of a calibration offset following calibration with
a silver wire