Brita PURITY 450 Steam Mode D'emploi page 35

-1, -2, -3, -4 level – data of the cartridges used before the current one.
Carbonate hardness
Total meter reading when
changing the fi lter cartridge
At the top left, the indicator for the fi lter cartridge (-1 for previous fi lter cartridge) is displayed alter-
nately with the water hardness set and the hardness unit. At the top right, the fi lter system size is
displayed alternately with the bypass setting (display 1 s indicator, 1 s water hardness), at the bot-
tom left, the meter reading when changing the cartridge (-1) and at the bottom right, the installation
date of the cartridge.
Meaning: the fi lter cartridge most recently used was a PURITY 1200 cartridge, the fi lter cartridge
was inserted on 25/06/05 and operated up to a meter reading of 23166 litres.
The water hardness set was 14°KH and the bypass measured was 30%.
The same applies to the cartridge (-2), preceding fi lter cartridge and the other preceding fi lter
cartridges -3,-4.
Error Messages
The error level E1 indicates whether and from when until when an error has occurred at the water
intake meter.
E1 is activated as soon as the current bypass is not correctly identifi ed.
The word Start is then displayed together with the date of occurrence.
As soon as the current bypass setting is identifi ed correctly again, the error has ended and the Stop
date is added. At error level 01 the Stop and Start display alternates every second.
Error level E2 indicates whether and from when until when an error has occurred at the outlet water
meter. Display is similar to level E1.
By-pass
alternating
alternating
Cartridge indicator
Date of inserting the cartridge
Type
33