Brita PURITY 450 Steam Mode D'emploi page 27

Selecting the units of measurement
You can choose between European, American and international units of measurement on the
display.
For European units of measurement: depending on the type of fi lter system (STD, STM or GYP),
select the specifi ed unit of measurement for water hardness °KH, °EH, °FH or ° DH. The unit of
volume and date format are then automatically displayed in litres and DD/MM/YY respectively.
For American units of measurement, select gpg (unit of measurement for water hardness); the
unit of volume and the date format are then automatically displayed in US gallons and MM/DD/YY
respectively.
For international units of measurement, select mg/L (unit of measurement for water hardness);
the unit of volume and the date format are then automatically displayed in litres and DD/MM/YY
respectively.
Parameterisation
The following parameters have to be entered:
• Filter system type and size
STD 4 = PURITY 450 Quell ST
STD 6 = PURITY 600 Quell ST
STD 12 = PURITY 1200 Quell ST
STM 4 = PURITY 450 Steam
STM 6 = PURITY 600 Steam
STM 12 = PURITY 1200 Steam
GYP 6 = PURITY 600 Quell GY
GYP 12 = PURITY 1200 Quell GY
• Water hardness unit and water hardness value
The following units of hardness may be selected for the various types of fi lter system:
Unit of carbonate hardness for fi lter system types STD and STM:
°KH (German unit of hardness)
°EH (English unit of hardness)
°FH (French unit of hardness)
gpg (American unit of hardness)
mg/L (international unit of hardness)
Unit of total hardness for fi lter system type GYP may be
°DH (German unit of hardness)
°EH (English unit of hardness)
°FH (French unit of hardness)
gpg (American unit of hardness)
mg/L (international unit of hardness)
• Monthly limit 2–12
Carbonate Hardness
Exhaustion after months
Type/Filter System Size
Date fi eld
25