SSS Siedle BVPC 850-0 Notice D'utilisation page 19

Navigation bar / Content area
(Home screen continued)
Additional symbols
Messages
Video memory
Delete
Display cleaning
Switching off the display
Call door
Make internal call
Light switching
On/off switch
Accessing the Messages menu
The Messages menu allows you to display predefined events, such as the
arrival of mail in the letterbox.
The messages must be programmed by the electrical installer.
Remarks:
• For this function to be usable, you require a bus input module and addi-
tional accessories such as a mail notification system.
• Up to 15 messages can be defined.
• Only the information relating to switching statuses which have actually
been programmed for your panel will be displayed.
Mail notification
system
Warning message
Gas detector
Smoke/fire detector
Water detector
Accessing the Video memory menu
In the video memory menu, all images saved when door calls were made are
displayed. You can delete individual images or all stored images.
Deleting a displayed image
Switching off the touch function
The display is disabled for 10 seconds to allow display cleaning without
initiating a function.
Switch off the display
The panel changes to the standby mode.
Remark: If the panel is in the standby mode, you will still be made aware of
missed door calls and new messages.
In this case, the relevant status symbol flashes, even with the display
switched off.
Open or close garage
door
Open or close shutter
e.g. open shutter, tem-
perature +1 °C, etc.
e.g. close shutter, tem-
perature –1 °C, etc.
Door contact detector
Window detector
Glass breakage
detector
Movement sensor
module
19