SSS Siedle BVPC 850-0 Notice D'utilisation page 18

Overview of menus and symbols
Navigation bar / Content area
Home screen
Call rerouting
Internal group call
Collective announce-
ment
Automatic call accept-
ance
Doormatic
Camera step
18
Accessing the home screen with the individually stored functions
Using the home screen, it is possible to access the control functions and
intercom functions set up by your electrical installer.
Remark: Only those functions are displayed which have actually been pro-
grammed for your panel.
Switching call rerouting on and off
Incoming calls are rerouted to a different indoor device.
Remarks:
• As long as call rerouting is active, the relevant symbol appears in the
status display.
• You can continue to accept incoming calls at your panel.
Placing an internal group call
Indoor devices can be collated into a group.
Using this function, all the devices of a group are called simultaneously. The
speech connection is established to the user which first picks up the call.
Placing a collective announcement
Announcement to one or more hands-free telephones and/or panels
This function can be used for instance for making an announcement in a
waiting room or for searching for individual personnel in a building.
Switching automatic call acceptance on and off
Incoming internal calls are automatically accepted and the speech connec-
tion established.
Switching Doormatic on and off
The door release is automatically actuated after pressing the call button,
either for one specific door or all doors depending on the programming.
Remarks:
• The Doormatic function can be switched on for undetermined time
periods, and also for a specific time span (up to max. 9 hours 59 minutes).
• As long as the Doormatic function is active, the relevant symbol appears in
the status display and the door release button lights up.
Accessing the camera scan function
All the cameras available in the system are cyclically actuated in a defined
sequence (up to 8 cameras). After 30 minutes, the camera scan is automati-
cally interrupted. During this period, the display is not switched off.
In order to interrupt the camera scan beforehand, change to the home
screen and press on the camera scan function again. An active camera scan
is displayed in the navigation bar with
yellow symbol.
In order to change more quickly to the next camera image, tap twice in
quick succession using your finger on the displayed video image.
and in the home screen with a