Güde MIG 192/6K Traduction Du Mode D'emploi D'origine page 20

Inspection and maintenance
Hose set maintenance
Regular maintenance needs to be executed for perfect
function of the hoses.
The gas nozzle needs to be regularly sprinkled by
protective nozzle spray and freed of deposits inside.
The following steps need to be taken for this case:
1. Remove the nozzle (1) by pulling forward
2. Free the nozzle of any deposits formed by the weld
cinder.
3. Sprinkle it with protective nozzle spray.
4. If the nozzle is rusty, it needs to be replaced.
Current nozzle maintenance
The following steps need to be taken for this case:
1. Remove the nozzle (1) by pulling forward.
2. Unscrew the current nozzle (2)
3. Check whether the hole the wire goes
through is not too wide or, in case of need, replace it
before reassembly.
4. Press the button on the hose so that the
wire protruded and remount the current nozzle.
Nozzle holder maintenance
The following steps need to be taken for this case
(see pic. 15):
1. Holes for gas drainage can sometimes be slightly
stuffed, in such a case the gas nozzle needs to be
disassembled by pulling (1),
2. unscrew then the current nozzle (2),
3. unscrew the gas distributor (3) and replace with a new
one.
Inspektions- und Wartungsplan
Time interval Description
Remove the nozzle (1) Remove the nozzle (1) by pulling forward.
by pulling forward.
Safety instructions for inspection and maintenance
Only a regularly maintained and treated appliance can
become a reliable helper. Insufficient care and
maintenance can be a cause of unpredictable accidents
and injuries.
Service
Any technical questions? Complaint? Do you need
spare parts or operation manual?
Go to our website www.guede.com and the section
Service will help you quickly and without bureaucracy.
Please, help us to help you. In order to identify your device
in case of complaint, please indicate serial number, order
number and year of manufacture. All information is
available on the product label. To have all information
always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Important information for the customer
Please be sure to know that returning the product in or
after the warranty period must be made in the original
packaging.
20
Other
details