Spare Parts; Dismantling; Environmentally Responsible Disposal - Maico EZR B Série Instructions De Montage Et Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Fault
Cause, measure
Deposits on the
Call on the services of a
impeller and in
trained electrician. Install air
the housing
filter in the duct system.
caused by dust
Under no circumstances
in the air.
should the inside of the unit
be cleaned with water or a
high-pressure cleaner.
Impeller not
Switch off unit. Switch off all
turning.
supply circuits - switch off
mains fuse, secure against
being accidentally switched
back on and position a
visible warning sign. Call on
the services of a trained
electrician. Ensure that the
impeller is not blocked by
foreign bodies.
If the fault persists, disconnect unit
from the power supply, fit a sign
prohibiting it from being switched
back on and have cause of error
investigated by a trained electrician.
If faults reoccur, send the unit to our
factory for repairs.

14. Spare parts

For spare parts  unit overview in
Figure A. Only use original spare
parts.
When ordering spare parts, please provide
the following details:
1. Print no. 0185.0928.0004 of these
instructions.
2. Rating plate no.  rating plate on unit
or title page
3. Item number in Figure A.
Address for orders
Maico Elektroapparate-Fabrik GmbH
Steinbeisstrasse 20
78056 Villingen-Schwenningen
Germany
Tel. +49 (0)7720 694445
Fax +49 (0)7720 694175
E-mail: ersatzteilservice@maico.de
13. Fault rectification │ UK

15. Dismantling

Dismantling may only be undertaken
by an electrician.
1. Switch off mains fuse, secure and fit
warning sign.
2. Remove folded spiral-seam ducts from
fan.
3. Open terminal box cover and remove all
cables.
4. Remove fan.
16. Environmentally responsible
disposal
The unit and the packaging contain parts that
can be recycled, and should not end up in the
domestic waste.
Dispose of the packaging material in an
environmentally-friendly way, in compliance
with the regulations valid in the country where
you are.
At the end of its service life, dispose of the
unit in an environmentally-friendly way, in
compliance with the regulations valid in the
country where you are.
19

Publicité

Table des Matières
loading

Table des Matières