Specialist Installer Qualification; Intended Use - Maico EZR B Série Instructions De Montage Et Mode D'emploi

EZR/DZR ... B, EZR/DZR ... D
Figure A
1 End cover
2 Motor
3 Strut (3 pieces)
4 Impeller
5 End cover
6 Duct sleeve
7 Terminal box
8 Capacitor
S Sticker showing air flow and rotational
direction
T Rating plate
Figure B
Air flow direction with air drawn across motor

Rotational direction of impeller

Table of contents

1. Specialist installer qualification ............... 11

2. Intended use .......................................... 11

3. Safety instructions and warnings ............ 12
4. Product information ................................ 14
5. Operation: Switching on/off .................... 15
6. Technical data ........................................ 15
7. Transport, storage .................................. 16
8. Installation preparations ......................... 16
9. Installation .............................................. 16
10. Electrical connection ............................ 17
11. Commissioning, function test ............... 18
12. Cleaning, maintenance ........................ 18
13. Fault rectification .................................. 18
14. Spare parts .......................................... 19
15. Dismantling .......................................... 19
16. Environmentally responsible disposal .. 19
17. Wiring diagrams ................................... 30
Table of contents │ UK
Please read the instructions carefully
before mounting and using for the
first time. Follow the instructions.
Pass these instructions onto the
owner for safekeeping.
1. Specialist installer qualification
Mounting may only be carried out by spe-
cialists who have the necessary knowledge
and experience in ventilation engineering.
Only a trained electrician is permitted to
work on the electrics. You are deemed a
trained electrician if you are familiar with the
relevant standards and guidelines, can
competently and safely connect units to an
electrical power supply in line with the
attached wiring diagram and are able to
recognise and avoid risks and dangers
associated with electricity on the basis of
your technical training and experience.
2. Intended use
EZR ... and DZR ... fans are used to extract
air from or ventilate changing rooms, design
offices, workshops, production sites, machine
or workplace extraction areas, industrial halls,
laboratories, fitness rooms, restaurants and
other commercial areas.
Operation is only permitted with:
● a fixed installation within buildings.
● installation on a wall with sufficient load-
bearing capacity.
● installation with protective grille with unco-
vered air inlet or outlet (protection against ac-
cidental contact according to EN ISO 13857).
These duct fans are designed for domestic
and light-duty commercial use. No other or
additional use is intended.
Acknowledgements: © Maico Elektroapparate-Fabrik
GmbH. This instruction is a translation of the German
original operating instructions. We cannot be held
responsible for mistakes or printing errors and retain the
right to make technical modifications without giving prior
notice. The brands, brand names and protected trade
marks that are referred to in this document refer to
their owners or their products.
11