Spare Parts; Dismantling; Disposal - Maico EZLB Série Mode D'emploi

If the fault still continues or occurs
again, fully (all poles) disconnect fan
from the power supply.
Have cause of error established and
rectified by a trained electrician.

10. Spare parts

For spare parts  Equipment
overview in Chapter 2.1.
Please provide the following data when
ordering spare parts:
1. Print no. 0185.1170.0000 of these
instructions
2. Rating plate no., at side on rating plate
( Unit,  instructions jacket)
3. Item number in Chapter 2.1.
Address for orders
Maico Elektroapparate-Fabrik GmbH
Steinbeisstrasse 20
78056 Villingen-Schwenningen
Germany
Tel. +49 7720 694 445
Fax +49 7720 694 175
E-mail: ersatzteileservice@maico.de
9. Fault rectification │ gb

11. Dismantling

Dismantling may only be undertaken
by a trained electrician ( Chapter 1).
Danger to life from electric
shock.
DANGER
Switch off all supply circuits
before accessing the connecting
terminals. Switch off mains fuse,
secure so it cannot be switched
back on and visibly fit warning
sign.
1. Switch off mains fuse, secure and fit
warning sign.
2. Remove folded spiral-seam ducts
from fan.
3. Remove the terminal box cover.
4. Remove all cables.
5. Remove fan.

12. Disposal

Not in domestic waste. The unit
contains in part material that can be
recycled and in part substances that
should not end up as domestic
waste.
Dispose of the unit once it has reached the
end of its working life according to the
regulations valid where you are.
17