Prepare The Remote Transmitter; Charge The Remote Transmitter - Petsafe SportDog SportTrainer SD-1225E Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
STEP :: 01

PREPARE THE REMOTE TRANSMITTER

CHARGE THE REMOTE TRANSMITTER

1. Lift the rubber cover protecting the Charging Jack.
2. Connect one of the charger connectors to the
Charging Jack.
3. Plug the charger into a standard wall outlet.
4. Charge the Remote Transmitter for 2 hours for the first
charge and every charge thereafter.
Using Lithium-Ion technology, the Remote Transmitter only
requires a 2 hour charge. It is not harmful to let the unit charge
for more than 2 hours.
5. When charging is complete, replace the
rubber cover.
NOTE: Approximate battery life between charges is 40 to 60
hours, depending on frequency of use.
TRANSMITTER INDICATOR LIGHT
OPERATIONAL MODE
Continuous static, tone, or
vibration stimulation pressed
Continuous static, tone, or
vibration stimulation pressed
Momentary static stimulation
button pressed
Momentary static stimulation
button pressed
Unit is charging
Unit is fully charged
(charger still connected)
LIGHT COLOUR
BATTERY STATUS
Green
Good
Red
Low
Green
Good
Red
Low
Red
Low
Green
Good
SPORTDOG.COM
CHARGER CONNECTOR
PLACED IN THE
REMOTE TRANSMITTER
CHARGING JACK
LIGHT FUNCTION
Light is solid in colour while button
is pressed
Light is solid in colour while button
is pressed
Light flashes once and turns off
Light flashes once and turns off
Light is solid in colour while
charging
Light flashes once per second once
the battery is completely charged
7

Publicité

Table des Matières
loading

Table des Matières