Prepare The Collar Receiver - Petsafe SportDog SportTrainer SD-1225E Manuel D'utilisation

STEP :: 02

PREPARE THE COLLAR RECEIVER

CHARGE THE COLLAR RECEIVER
1. Place Collar Receiver in the Charging Cradle as shown.
2. Place the charger connector into the back of the Charging Cradle.
3. Plug the charger into a standard wall outlet.
4. Charge the Collar Receiver for 2 hours for the first charge and every
charge thereafter.
Using Lithium-Ion technology, the Collar Receiver only requires a 2 hour
charge. It is not harmful to let the unit charge for more
than 2 hours.
CHARGING CRADLE INDICATOR LIGHT
OPERATIONAL MODE
No Collar Receiver on the Charging Cradle but
charger is connected
Unit is charging
Unit is fully charged (Collar Receiver on
Charging Cradle)
TO TURN THE COLLAR RECEIVER ON
Press and release the On/Off Button. The Collar Receiver Indicator Light will come on and the Collar Receiver will beep 1 - 3
times depending on what static stimulation range is chosen. The default
is 2 (medium).
TO TURN THE COLLAR RECEIVER OFF
Press and release the On/Off Button. The Receiver Indicator Light will
come on solid (red) and the Collar Receiver will beep continuously
for 2 seconds.
To extend the life between charging cycles, turn the Collar Receiver off
when it is not in use.
NOTE: Approximate battery life between charges is 40 to 60 hours,
depending on frequency of use.
8
LIGHT COLOUR LIGHT FUNCTION
Green Light is solid in colour
Red Light is solid in colour while charging
Green Light flashes once per second once the battery is
completely charged
ON/OFF BUTTON
SPORTDOG.COM