Speedlink Blue Lightning Wheel SL-6685 Mode D'emploi page 9

2.) Hold down one of the direction buttons until you again hear
two beep tones (for the functions of the direction buttons,
see the table below).
Direction button
p
t or u
q
3. Changing from foot pedal to hand control
1.) Hold down the SET and X buttons until you hear a beep tone.
Press one of the pedals or the accelerator or brake lever on
the steering wheel until you hear a beep tone.
2.) Now press the function button, to which you wish to assign
the function of the pedal/lever you are pressing, until you
hear two beep tones.
Changing back to foot pedal control:
1.) Simultaneously hold down the SET and X buttons until you
hear two beep tones.
2.) Press one of the pedals or a lever on the steering wheel until
you hear a beep tone.
3.) Press this pedal or lever again until you hear two beep tones.
4. Switching the vibration function on/off
1. Briefly press the "SET" button several times until you hear
two beep tones.
2. Now press the "Start" button.
3. To switch the vibration function on or off again, repeat these
two steps.
You can tell by the LED whether the vibration function is on or off;
refer to the table below to see what the various LED colours mean
with the different consoles.
Steering sensitivity
30°, high sensitivity
60, medium sensitivity
90°, low sensitivity
9
D
GB
F
E
I