Aqua Medic Cubicus CF Qube Mode D'emploi page 7

1. Thread
2. Rubber sealing
3. Slide ring
4. Nut
There is a blue fitting in the mounted bend of the return line. Here, air is sucked in when the pump in the
cabinet fails. This prevents the formation of communicating pipes and an overflow of the filter tank by
returning water.
When starting the aquarium, water has to be filled in until the filter tank is filled up to 10 – 12 cm in the front
part and then the pump has to be started. If the water level in the filter tank decreases, water has to be filled
in until the a.-m. maximum is reached. Take care that enough space is left so that the inflowing water in case
of failure or shutdown of the circulation pump still fits into the filter tank.
4. Skimmer EVO 500
See separate manual. The skimmer is hooked to the rear wall of the filter sump with the holding unit without
screws (refer to Fig. 1).
5. Illumination
LED Illumination Qube (see separate manual)
Both Qubes are screwed on the rear panel with the supplied
6. Operating the aquarium
For operating the Cubicus CF Qube, we recommend our Reef Life series as accessories:
Reef Life Calcium supplies corals with essential calcium and trace elements.
•
Reef Life Iodine is essential for the care of many corals.
•
If both additives are applied combined and regularly, they guarantee for successful salt-water aquarist.
We recommend to prepare your sea water with osmosis water in order to minimize from the beginning algae
problems by silicic acids, phosphates and nitrates. Sea-salt of Aqua Medic is formulated from highly purified
compounds. In this way, both products will support you to keep the content of the above-mentioned
substances as low as possible.
The fixing of rocks and corals can easily be done with the underwater adhesive Reef Construct.
7. Warranty conditions
AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all
material and manufacturing defects of the device. Incidentally, the consumer has legal rights; these are not
limited by this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear ie:
impellers or drive wheels etc. The original invoice or receipt is required as proof of purchase. During the
warranty period, we will repair the product for free by installing new or renewed parts. This warranty only
covers material and processing faults that occur when used as intended. It does not apply to damage caused
by transport, improper handling, incorrect installation, negligence, interference or repairs made by
unauthorized persons. In case of a fault with the unit during or after the warranty period, please
contact your dealer. All further steps are clarified between the dealer and AB Aqua Medic. All
complaints and returns that are not sent to us via specialist dealers cannot be processed. AB Aqua
Medic is not liable for consequential damages resulting from the use of any of our products.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved – 03/2019
bracket.
7