Igniting And Regulating The Burners - NEFF L 2530 Série Mode D'emploi Et Instructions De Montage

The association of the operating
elements knobs can be seen from the
appliance description and recognized
from the symbols on the gas cook
screen.
Igniting the burners is facilitated by an
electric spark igniter.
Hotplate burners:
You can regulate infinitely between the
high-power setting and low setting.
= large setting
= small setting
Igniting with the electric spark igniter:
1. Press in the appropriate knob and
turn anticlockwise to high setting.
The electric spark ignition will
operate as long as the knob is
pressed in.
2. After igniting the flame, keep knob
pressed in for around 5 seconds.
3. Before releasing, press knob
vigorously once more.
4. If there is no ignition, or the flame goes
out, repeat ignition procedure after
around 3 seconds.
5. To switch off the burners, turn knob to
the right to the zero setting.

Igniting and regulating the burners

Igniting with match or similar expedient:
1. Press in the appropriate knob, turn it
anticlockwise to high setting and light
the burner with a match.
2. Keep knob pressed in for around
5 seconds.
3. If the flame goes out, repeat ignition
procedure after around 3 seconds.
4. To switch off the burners, turn knob to
the right to the zero setting.
15