Trouble-Shooting Guide - NEFF L 2530 Série Mode D'emploi Et Instructions De Montage

Calling the customer service is not always really necessary. In some cases, you can remedy the situation your-
self. The following table may contain some helpful tips.
Important general safety guidelines:
Service or repair work on the electronic components may only be performed by a qualified expert. Without exception, prior
to starting such repairs, the appliance must be disconnected from the mains. This may be accomplished by tripping the
automatic fuse or by removing the fuse from the fuse box that controls your flat or apartment.
Problem
There is a general failure of all electri-
cal functions.
. . . when the enamelled grate has
become rough in the area of the hot-
plate burner?
. . . when the hotplate burners burn
unevenly after setting up the appli-
ance?
. . . when the flame pattern of the
hotplate burners suddenly changes?
. . . when the electric ignition of the
hotplate burners no longer func-
tions?
. . . when the toggle switch sudden-
ly has to be pressed longer for ignit-
ing the hotplate burners?
. . . when the flame goes out after
ignition of the burners?
When you call on after-sales service, please give:
You will find this information on the back of these operating instructions.

Trouble-shooting Guide

Possible cause
Defective fuse.
Normal occurrence because of high
temperature.
Flame pattern uneven because of
wrong gas setting.
Incorrectly placed burner parts.
Food residues or cleaning agent bet-
ween sparking plug and hotplate
burner.
Sensor bent
Incorrectly placed burner parts.
Pressed too briefly.
Pressed too lightly.
E-Nr.
Remedy
Check teh fuse in the fuse box, and
replace if required.
Not possible. Function is not impai-
red.
Have the gas setting checked by
dealer or by the appliance fitter.
Put on the removable burner parts
correctly.
Carefully free gap between sparking
plug and hotplate burners and clean.
Sparking plug must be free from
grease.
Carefully bend back the sensor into
the vertical position.
Put on the removable burner parts
correctly.
Press switch longer
Press toggle forcefully before relea-
sing it.
FD
17