there are signs of any other defect. Return the complete product to the vendor or
to a certified electrician for inspection and/or repair. Always ask for original parts.
26. Do not use attachments and/or accessories that have not been recommended or
supplied by the manufacturer.
27. The appliance (incl. cord and plug) may only be opened and/or repaired by
properly authorised and qualified persons.
28. Only use this heater for its intended purpose and as described in this instruction
manual.
Not abiding by instructions 26, 27 & 28 may lead to damage, fire and/or personal
injuries. A failure to adhere to these rules also immediately nullifies the guarantee
and vendor, importer and/or manufacturer do not take responsibility for
consequences!
Description
1. Handle (back)
2. Casing
3. Radiation grill
4. Reflector
5. Quartz lamp (2x)
6. Base
7. Control knob (2x)
8. Pilot light (2x)
Location and Connection
Remove all packaging material and keep out of reach of children. After removing
packaging, check the appliance for damage or other signs that could indicate a
fault/defect/malfunction. In case of doubt, do not use the appliance, but contact
your vendor for inspection or replacement.
Choose a suitable location for the heater which is at least one metre away from
any obstructions, walls or inflammable materials (see also safety instructions).
This heater has been designed to be used as a stand-alone unit; never use the
heater when it is hanging, leaning, etc.!
Caution! A push button is located beneath the heater: this is the safety tip-over
cut-out switch. Knocking over the heater will cause this button to protrude and
the heater will turn off automatically. This means the heater will not work when
hanging.
Make sure a functioning heater is always placed on a solid, flat and horizontal
surface.
Check if the control knob is set to 'OFF' (2x). Fully extend the power cord and
plug into a suitable 220-240V socket. Only connect the heater to an earthed
socket!
15
any of the