Safety Switch Off; Service And Repair - Steba Induktion IK 50 Mode D'emploi

Safety switch off:

Was the time not adjusted and the appliance is used in the „Power" or „Tempera-
ture" function, the appliance will switch off automatically 120 min after the last
button was pressed.
Cleaning:
∙ Clean the appliance after each use.
∙ Pull the plug and wait until the appliance completely cooled down.
∙ When pots are used which have not a clean button, decolouring and burning in on
the glass surface can occur.
∙ Use a damp cloth and some detergent for cleaning.
∙ Never use abherasive cleaners, metal wool or thinners for cleaning.
∙ If the air inlets are covered with dust, remove the dust with a vacuum cleaner.
∙ Never spill water on the glass top or immerse the appliance in water.
12
Disposal:
Packaging disposal:
Do not throw away the package materials. Please put it in the recycling bin.
Gift box: Paper, should be put to the old paper collection point.
Plastic packaging material and foils should be collected in the
special collection containers.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the retailer
where the product was purchased. They can take this product for environmental safe
recycling.

Service and Repair:

If the appliance must be repaired, plaese get in touch with your trader or with the
manufacturer:
STEBA Elektrogeräte GmbH & Co KG
Pointstr. 2, 96129 Strullendorf / Germany
Distribution-Tel.: 09543 / 449-17 / -18, Service-Tel.: 09543 / 449-44, Fax: 09543 / 449-19
e-Mail: elektro@steba.com Internet: http://www.steba.com
Technical data:
IK50
230V~ 50 Hz 2000Watt
Size: 300 x 380mm
Height: 55mm
13