The Pre-Mix Level Adjustment Menu {Lvl; The Phase Inversion Menu {Phse - Miranda AAP-711i Notice D'installation Et D'utilisation

Guide to installation & Operation

3.4.4 The pre-mix level adjustment menu {LVL}

This menu enables to adjust each level at the switcher outputs. This adjustment is made within a
range of -96 dB to +12 dB by 0.5 dB steps; any overload condition is displayed on the corresponding
led. These parameters can be accessed by remote control.
Procedure
• Press [+] or [-] displays {LVL},
• Press [SEL] displays 1&2, use [+] or [-] to scroll through the available channels 1&2, 1, 2. (AAP-
712i only)
• Press [SEL] validates the channel and displays L&R, use [+] or [-] to scroll through the available
channels L&R, L, R.
• Press on [SEL] validates the channel and displays the current level value. Use [+] to increase or [-]
to decrease the value. For a quicker response, keep the push button depressed.
• Press [SEL] to store the new parameter, and to return to the previous menu
• Or press [ESC] to return to the previous menu without updating the parameter.
• To turn off the display, press [ESC].

3.4.5 The phase inversion menu {PHSE}

This menu enables individual phase inversion of signals issued from the pre-mix level adjustment
stage. These parameters can be accessed by remote control.
Procedure
• Press [+] or [-] displays {PHSE},
• Press [SEL] displays 1&2, use [+] or [-] to scroll through the available channels 1&2, 1, 2. (AAP-
712i only)
• Press [SEL] validates the channel and displays L&R, use [+] or [-] to scroll through the available
channels L&R, L, R.
• Press [SEL] validates the channel and displays the current value, use [+] or [-] to scroll through the
available values: NORM or INV.
• Press [SEL] to store the new parameter, and to return to the previous menu
• Or press [ESC] to return to the previous menu without updating the parameter.
• To turn off the display, press [ESC].
18
AAP-711i - AAP-712i