Installation Guide; Installation Procedures - Blaupunkt Caracas 2010 U Mode D'emploi Et De Montage

Installation Guide

Installation Procedures

First complete the electrical connections, and
then check for correctness.
Reset
Press button. At an angle hold the panel to
pull it out. Then press the RESET button with
a pointed object to reset the unit to the original
status.
Note: Press the RESET button will erase the
clock and stored stations.
Reset
Installation Opening
This unit can be installed in any dashboard
having an opening as shown below.
The dashboard should be 4.75 mm - 5.56 mm
thick in order to be able to support the unit.
14
Important: Remove these two screws before installation. Otherwise, the player will not work.
Mounting bolt
rubber cushion
Transport
screws
1. Insert mounting collar into the dashboard, and bend the mounting tabs out with a screw-
driver.
Make sure that lock lever
2 Secure the rear of the unit.
After fixing mounting bolt and power connector, fix the rear of the unit to the car body by rubber
cushion.
3. Insert trim plate.
is flush with the mounting collar (not projecting outward).
Lock lever