Specifications
General
Power supply:
Maximum power output:
Continuous power output:
Suitable speaker impedance:
Pre-Amp output voltage:
Fuse:
Dimensions (WxHxD):
Weight:
Aux-in:
Max. current consumption:
FM Stereo Radio
Frequency range:
Usable sensitivity:
Quieting sensitivity (S/N=50dB): 12 dBμ
Frequency response:
Stereo separation:
Image response ratio:
IF response ratio:
Signal/noise ratio:
Note: Specifications and the design are subject to change without notice due to improvements in technology.
16
12 V DC (11 V - 16 V)
Test voltage 14.4 V, negative ground
45 W x 4 channels
20 W x 4 channels (4 Ω,10 % T.H.D.)
4 - 8 ohm
2.0 V (CD play mode: 1 KHz, 0 dB,
10 KΩ load)
15 A
178x50x160 mm
1.7 kg
≥300 mV
12 A
87.5 - 108.0 MHz (Europe)
87.5 - 107.9 MHz (America)
8 dBμ
30 Hz - 15 kHz
30 dB (1 kHz)
50 dB
70 dB
55 dB
MW (AM) Radio
Frequency range:
Usable sensitivity (S/N=20dB):
Disc Player
System:
Frequency response:
Signal/noise ratio:
Total harmonic distortion:
Wow and flutter:
Channel separation:
Components
Mounting sleeve
Machine screws M 5x6 mm
Mounting bolt (50 mm)
Wire connector
Removable face plate case
Trim plate
L-key
Operating instructions
Rubber cushion
522 - 1620 KHz (Europe)
530 - 1710 KHz (America)
30 dBμ
Disc digital audio system
20 Hz - 20 kHz
>80 dB
Less than 0.20 % (1 kHz)
Below measurable limits
>55 dB
1
4
1
1
1
1
2
1
1