Note: To receive the signals from your CableLink, switch the TV connected to your CableLink
receiver (remote TV) on the A/V channel (on some TV's use channel "0"). If connected a blue
screen appears if no channel is programmed on your CableLink.
5.4. 5in1 Remote Control
1.
Open the battery compartment on the reverse of the remote.
2.
Place 2 batteries (AAA size, not included). Note the correct polarity/position.
3.
Close the battery compartment.
CableLink 75 function keys on your 5in1 Remote:
0-9
CHAN+
CHAN-
PREV.CH
CATV/AV
DISP
NOTE: The CableLink channels are dedicated channels for the CableLink system and mostly
not identical to the channels you are used to by your cable provider!
SCAN
CHAN ADD/DEL
4+0
SET
For a more detailed instruction on the remote: look at Chapter 7.
6. CableLink 75 channel set up
You can program the CableLink 75 in three different ways.
Method A
By searching the entire frequency band. This is the best way to program your CableLink 75 if the
TV stations are on so-called +/- channels. Also if you do not know how the TV stations in your area
are transmitted, it is best to use this method. More information can be found in chapter 6.1.
8
Channel selection.
Next Channel
Previous Channel
Return to previous selected channel
Select between CableLink internal tuner or external connected
A/V equipment (e.g. DVD player)
On screen channel indication of the set CableLink channel.
Automatic search for channels (6.2).
Add or delete CableLink channels. To delete a stored CableLink channel
(e.g. channel 30), select this channel and then press CHAN ADD/DEL.
On screen the text "CATV 30 DELETED" appears.
Next time you step through the channels, channel 30 will not appear.
To add a new channel; press the desired channel number (e.g. 40) as
on the 0-9 keypad. Then press CHAN ADD/DEL. On screen the text
"CATV 40 ADDED" appears.
To add a security code (=individual code unique to your remote), if
more than one CableLink systems are used within one house (read 6.4.)
MARMITEK