Optical Configuration; Setting The Transmitter Optics - Elkron EL250RT Notice D'installation Et D'utilisation

The direction settings for the transmitter and receiver optics are already set to default.

11.1 SETTING THE TRANSMITTER OPTICS

POWER SUPPLY LED

DIP SWITCHES ON A COLUMN WITH 4 TRANSMITTERS
To turn off the LEDs on the optics, set DIP7 to the OFF position.
Note: The dip switches are set in the factory and should not be changed. For special configurations, you are
advised to contact Elkron technical support.
56

11 OPTICAL CONFIGURATION

1 2 3 4 5 6 7
TX4
TX3
TX2
TX1
EL250RT
TAMPER
1 2 3 4 5 6
ON
ON
ON
ON