Installing The Transformer In The Column - Elkron EL250RT Notice D'installation Et D'utilisation

5 INSTALLING THE TRANSFORMER IN THE COLUMN

The kit includes:

1 160VA transformer with 2 outputs;

1 bolt 8x60;

2 nuts M8;

1 perforated plate;

1 plate;

2 black insulation membranes;

4 screws for anchoring to the barrier.
1. Insert the 60mm bolt through the perforated plate and screw on the locking nut
2. Position the plate in the cavity and tighten the 4 fixing screws
3. Insert a membrane, the transformer, the second membrane and the plate. Secure the assembly with the fixing nut
Note: it is advisable to position the transformer in the space provided to facilitate tightening the fixing screws in the column
and to allow sufficient space for the battery.
44
EL250RT