Operating Temperature - Mi Smart Electric Folding Bike XMDZLZXC01QJ Manuel D'utilisation

Battery Charging Specifications
Input Voltage
Max. Output Power
Max. Output Current
Charging the battery pack
The removable battery pack can be charged both with or without the bike. Open the rubber cover on the
charging port and the battery pack. Then, plug the connector into the charging port.
Checking the battery level
To check the battery level, press the Power Check Button on the battery pack.
Release button
It takes less than 4 hours to fully charge the battery. When charging the battery pack for the first time,
the charging time should not exceed 6 hours.
If the battery level drops to 30% or below and the bicycle has not been used for 7 days, it
will enter storage mode. To reactive the battery, connect the power adapter to charge it or
press and hold the power check button until the indicator lights up.

Operating Temperature

Status
While charging
During use
Storage (at least 80% of battery level)
100 - 240 V~
84 W
2 A
Power check button
Charging port
Battery & Indicator status
Press the Power Check Button. You can check the
remaining battery level by the indicators as follows:
• 4 indicators on: approx. 76%-100%
• 3 indicators on: approx. 51%-75%
• 2 indicators on: approx. 26%-50%
• 1 indicator on: approx. 6%-25%
• 1 indicator blinking: about 5%
7
Minimum ( °C )
0
-15
-20
Maximum ( °C )
45
45
35