Mi Smart Electric Folding Bike XMDZLZXC01QJ Manuel D'utilisation page 6

5 Adjusting the height of the saddle
Maximum
insertion mark
Maximum
Minimum
insertion mark
insertion mark
At the ideal handle bar height, the forearms of riders are nearly level with the handle bars, making the
shoulders and arms relaxed. However, while adjusting the seat height and the handle bar, first make sure
the minimum insert mark must not be any higher than the upper edge of the seat post clamp. Make sure
the seat post clamps are properly tightened after adjusting the seat height. The seat post clamps should
be torqued to more than 7 N ⋅ m.
Body height
195 cm
10 20 30 40
Body height
190 cm
Start-up
Power button
A
Body height
185 cm
60 70 80 90
50
Body height
180 cm
Loosen the upper and lower seat post clamps to adjust
the seat to the proper height, then securely tighten them
again. When adjusting the seat height, the minimum
insert mark must not be any higher than the upper edge
of the seat post clamp. The seat height and handle
bar should be adjusted before use so as to ensure a
comfortable riding position and reduced fatigue. The
seat height and handle bar height differ from person to
person. At the ideal seat height, the rider should be able
to reliably put one foot down to hold the bicycle upright.
Body height
175 cm
100 110 120 130
Body height
170 cm
1. Charging
Make sure your bike is fully charged on the first use. Use
the charger included the package to charge your bike. The
indicator is red when charging, and turns into green when
fully charged.
2. Turning on
Press and hold the power button (A) at the bottom of the
dashboard for 2 seconds to turn on your bike.
4
Body height
165 cm
140 150 180
160 170
Body height
160 cm
190