Mi Smart Electric Folding Bike XMDZLZXC01QJ Manuel D'utilisation page 5

Adjusting the height of the handle bar
2
3
Installing the seat post
Installing and folding pedals
4
B
Use the 5 mm Allen wrench to loosen the two screws
in the handle bar. Adjust the handle bar upward or
downward to the desired position, and then tighten the
screws.
Riders may have different feelings on steering and
braking. Please test the bicycle in a safe environment
before riding it on public roads.
5 mm
Allen Wrench
Insert the seat post into the frame, the direction of the
seat should be consistent with the frame, and the height
of the seat post must in between the uppermost and the
lowermost marks.
1. Install pedals
Use the 15 mm open-end wrench to install the pedals. ( Note:
Turn the pedal axle counterclockwise when installing the left
pedal, and the pedal axle clockwise for the right pedal. )
L
L
15 mm Open-end
Left pedal
Wrench
2. Fold pedals
A. Push the pedals inwards to the bike.
B. Turn the pedals upwards or downwards to fold them.
3
R
R
Right pedal