Mi Smart Electric Folding Bike XMDZLZXC01QJ Manuel D'utilisation page 7

Instructions for use
1. Folding and unfolding the handle post
A
2. Folding and unfolding the frame
1 2
B
clamp
handle
post hinge
C
3
4
Step 1. To unfold the handle post, hold the left handle bar
to flip over the handle post. Lift the handle post upward
till the two sides of handle post hinge completely touch
(see fig.1 A).
Step 2. To lock the hinge, hold the lever connected to
the lower part of the hinge, then rotate it upward till the
lever touches the plastic clamp on the bottom of the
handle post (see fig.2 B).
Step 3. To secure the hinge latch, rotate the plastic
clamp on the handle post clockwise till it cannot be
moved anymore. Make sure the hook on plastic clamp
catches the lever completely (see fig.2 C).
Step 4. For a better packaging, the handle bars are not
firmly locked during shipping. After the handle post hinge
is locked and the latch is secured, adjust the handle bars
to the proper position and lock the 2 bolts on top with
a 5mm Allen Key. The recommended torque is 20-30
Newton Meter (see fig.3).
Step 5. Check to make sure the handle bars are
completely locked.
Step 6. To fold the handle post, rotate the plastic clamp
on the handle post clockwise. Then, rotate the lever
downward until the handle bars touch the front fork.
Loosen the upper and lower seat post clamp. Pull seat
clamp lever counterclockwise (see fig.4).
5