Certification - Mi Smart Electric Folding Bike XMDZLZXC01QJ Manuel D'utilisation

responsibility of the user.
• Any replacement, addition or removal of accessories that impact the performance of the bicycle
is deemed as a modification, including but not limited to replacement of the motor, installation of
external batteries, hacking into on-board computer or modification of data. Modifications to the
bicycle must only be made in accordance with local traffic regulations. Please note that you are no
longer entitled to free after-sales service, if any modifications are made to the bicycle.
The surface of the bicycle does not generate high temperatures and has no effect
on the human body.
The following statement:
We hereby state that the A-weighted sound pressure level at the rider's ear is less than 70 dB (A).
Motor
• When riding down a slope or on a non-brick pavement, limit the speed to within 15 km/h and do not
use enhanced mode.
• When using the motor, avoid collisions and keep the shaft well lubricated.
• All circuits and connections of the motor are designed and manufactured by professionals. Do not
try to alter them.
• When riding in rain, avoid the places where the motor shaft may immerse in water.
Brake
• Before riding, check the brake.
• When there is a need of braking, operate the rear brake first.
• Regularly check the wear of the brake pad. Replace the pad when the wear on the pad exceeds one
third of it.

Certification

EU Representative : Xiaoma Vacation GmbH
Address: Grünstr. 5,40212 Düsseldorf Germany
Hereby, iRiding (Xiamen) Technology Co., Ltd., declares that the radio equipment type XMDZLZXC01QJ
is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available
at the following internet address:
http://www.mi.com/global/service/support/declaration.html
Jintong Weng, Quality Engineer, Mar.2019, Xiamen China
15