Picture Image Adjustment; Image Level Select - Sanyo PLC-SE10 Mode D'emploi

VIDEO INPUT
Select image level among Standard, Cinema, Image 1, Image 2,
Image 3 and Image 4 by pressing IMAGE button on Top Control or on
Remote Control Unit.
Standard
Normal picture level preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
IMAGE 1~4
User preset picture adjustment in IMAGE ADJUST Menu (P34).
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
IMAGE SELECT Menu icon.
2
Press POINT DOWN button to move a red frame pointer to the
level that you want to set and then press SELECT button.
Standard
Normal picture level preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
IMAGE 1~4
User preset picture adjustment in IMAGE ADJUST Menu (P34).
32
PICTURE IMAGE ADJUSTMENTS
IMAGE LEVEL SELECT (DIRECT)
IMAGE LEVEL SELECT (MENU)
IMAGE button
Standard
Cinema
Image 1
Image 2
Image 3
Image 4
IMAGE SELECT MENU
Move the red frame pointer to the
level and press SELECT button.
The level being selected.
IMAGE SELECT
Menu icon