Picture Image Adjustment; Image Level Select - Sanyo PLC-SE10 Mode D'emploi

PICTURE IMAGE ADJUSTMENTS
Select image level among Standard, Real, Image 1, Image 2, Image 3
and Image 4 by pressing IMAGE button on Top Control or on Remote
Control Unit.
Standard
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
IMAGE 1~4
User preset picture adjustment in IMAGE ADJUST Menu (P28).
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
IMAGE SELECT Menu icon.
2
Press POINT DOWN button to move a red frame pointer to the
level that you want to set and then press SELECT button.
Standard
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
IMAGE 1~4
User preset picture adjustment in IMAGE ADJUST Menu (P28).
IMAGE LEVEL SELECT (DIRECT)
IMAGE LEVEL SELECT (MENU)
COMPUTER INPUT
IMAGE button
Standard
Real
Image 1
Image 2
Image 3
Image 4
IMAGE SELECT MENU
Move a red frame pointer to the level
and press SELECT button.
The level being selected.
IMAGE SELECT
Menu icon
27