Connecting To Video Equipment - Sanyo PLC-SE10 Mode D'emploi

CONNECTING TO VIDEO EQUIPMENT

Cables used for connection
• Video Cable (RCA x 1 or RCA x 3)
• S-VIDEO Cable ✽
• Audio Cable (RCA x 2 and Mini Plug (stereo) x 1)
Video Source (example)
Video Cassette Recorder
Audio Output
Audio Cable
(RCA x 2) ✽
AUDIO IN
Use any of VIDEO jack Y-Pb/Cb-
Pr/Cr jacks or S-VIDEO jack.
• When both VIDEO jack and S-
VIDEO jack are connected, S-
VIDEO jack has priority over
VIDEO jack.
• When both Y-Pb/Cb-Pr/Cr jacks
and S-VIDEO jack are connected,
Y-Pb/Cb-Pr/Cr jacks has priority
over S-VIDEO jack.
External Speaker
( ✽ = Cable is not supplied with this projector.)
✽
✽
Video Disc Player
Composite Component Video Output
(R, L) Video Output
Video Cable
(RCA x 1) ✽
VIDEO
VIDEO
R – AUDIO IN – L
(MONO)
EXT.SP(8Ω) AUDIO IN
(STEREO) COMPUTER
MONITOR OUT
EXT. SP(8Ω)(STEREO)
Audio Cable
(Stereo)
Audio Input
Speaker Terminal
CONNECTING PROJECTOR
Component video output equipment.
(such as DVD player or high-definition TV source.)
S-VIDEO Output
(Y, Pb/Cb, Pr/Cr)
Video Cable
(RCA x 3) ✽
Y - Pb/Cb - Pr/Cr S-VIDEO
Y – Pb / Cb – Pr / Cr
S – VIDEO USB
RESET
COMPUTER IN CONTROL PORT
✽
NOTE :
When connecting the cable, the power
cords of both the projector and the external
equipment should be disconnected from
AC outlet.
S-VIDEO
Cable ✽
Terminals
of the Projector
13