The Input Setting Menu - Sony VPL-SC50U Mode D'emploi

The INPUT SETTING Menu

The INPUT SETTING menu is used to adjust the input
signal.
Unadjustable items depending on the input signal are
not displayed in the menu.
When the video signal is input
I N P U T S E T T I N G
A S P E C T : 4 : 3
When the RGB signal is input
I N P U T S E T T I N G
D O T P H A S E : 5
S I Z E H : 1 0 5 6
S H I F T H : 2 1 9 V :
Operation
1. Select an item
Use the V or v key to select the item, then press the b
or ENTER key.
2. Adjust an item
• When changing the adjustment level:
To increase the number, press the V or b key.
To decrease the number, press the v or B key.
Press the ENTER key to restore the original screen.
• When changing the setting:
Press the V or v key to change the setting.
Press the ENTER or B key to restore the original
screen.
V I D E O
Memory No.
N o . 0 1
V I D E O / 6 0
Signal type
I N P U T – A
1 7
Memory No.
N o . 1 7
8 0 0 X 6 0 0
Signal type
DOT PHASE
Adjusts the dot phase of the LCD panel and the signal
input from the INPUT A connector.
Adjust the picture to where it looks clearest.
D O T P H A S E : 5
You can directly display the menu above with the DP
key on the control panel.
SIZE
Adjusts the horizontal size of picture input from the
INPUT A connector.
S I Z E H : 1 0 5 6
The higher the setting, the larger the horizontal size of
the picture.
The lower the setting, the smaller the horizontal size of
the picture. Adjust the setting according to the dots of
the input signal. For details on the suitable value for
the preset signals, see page 28 (EN).
SHIFT
Adjusts the position of the picture input from the
INPUT A connector.
S H I F T H : 2 1 9 V : 1 7
H adjusts the horizontal position of the picture.
V adjusts the vertical position of the picture.
As the setting for H increases, the picture moves to the
right, and as the setting decreases, the picture moves to
the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, the picture moves down.
Use the B or the b key to adjust the horizontal position
and the V and v key for the vertical position.
(Continued)
27
(EN)