Sony VPL-SC50U Mode D'emploi page 23

To turn off the power
1
Press the I / u key on the Remote Commander or on the control panel.
The following message appears to confirm if you want to turn off the
power.
P OW E R O F F ?
P l e a s e p r e s s k e y a g a i n .
I / u
Note
The message will disappear if you press any key except the I / u key,
or if you do not press any key for five seconds.
2
Press the I / u key on the Remote Commander or on the control panel
again.
The ON/STANDBY indicator flashes in green and the fan continues to
run for about 90 seconds to reduce the internal heat. Also, the ON/
STANDBY indicator flashes quickly for the first 30 seconds. During
this time, you will not be able to turn the power back on with the I / u
key.
3
Unplug the AC power cord from the wall outlet after the fan stops
running and the ON/STANDBY indicator lights in red.
When you cannot confirm the on-screen message
When you cannot confirm the on-screen message in a certain condition,
you can turn off the power by holding the I / u key on the Remote
Commander or on the control panel for about one second.
Note
Do not unplug the AC power cord while the fan is still running;
otherwise, the fan will stop although the internal heat is still
high, leading to breakdown of the projector.
23
(EN)